Assembly Clamps & Jigs



Subscribe to our Newsletter Enter Email:

	Home \| About Us \| Testimonials \| Search \| Project of the Month \| Braggers \| FAQ's \| Links

Current Category Assembly Jigs & Hardware > Assembly Clamps & Jigs


	Box Clamp Woodpeckers Inc. have recently added to their range a Box Clamp that is sure to appeal to those of us woodworkers that weren’t born with the extra pair of hands necessary to assemble some projects QTY:


	Box Clamp (set of 2) 2 units as above QTY:


	Box Clamp (set of 4) QTY:


	6" Clamping Precision Square Assembly is one of the more satisfying parts of any project, however, how often do we wish for that extra set of hands?? All sorts of aids have been made, but none as simple and as accurate as these Clamping Squares. QTY:


	Clamping Wedge When combined with the 6” Clamping Square, this new wedge makes a perfect accessory for driving a mitre joint into position while glue dries or fasteners can be set. It's substantially larger than our Mitre Clamp Set with over 3-3/4” of surface on each side. Now you can fixture for clamping wider frames than before. Like all Woodpecker Clamping products, the CS6 CLAMPING WEDGE is machined from a solid block of aluminium and anodized for durability with two attachment holes as well as a 5/16-18 threaded hole in the back face. With a threaded stud installed in both the wedge and toggle clamp, it'll be easy to keep the wedge in the correct orientation and alignment. QTY:


	Toggle Clamp This clamp is great for use in clamping fixtures and a variety of jigs. Full stroke is 25mm from full open to full close. This clamp can be used to either pull or push and will lock in either position. Clamping pressure 150kg's, tapped hole, 5/16-18, spindle bolt included. QTY:


	6" Clamping Kit This kit combines the 6” Clamping Square, the Clamping wedge and the toggle clamp giving you a perfect set of accessories for driving a mitre joint into position while glue dries or fasteners can be set. It's substantially larger than our Mitre Clamp Set with over 95mm of surface on each side. Now you can build a fixture for clamping wider frames than before. Like all Woodpecker Clamping products, the CS6 CLAMPING WEDGE is machined from a solid block of aluminium and anodized for durability with two attachment holes as well as a 5/16"-18 threaded hole in the back face. With a threaded stud installed in both the wedge and toggle clamp, it'll be easy to keep the wedge in the correct orientation and alignment. Adding the Toggle Clamp to this combo makes a really useful set up. Note: 4 kits are pictured above. QTY:


	6" Clamping Kit (set of 2) QTY:


	6" Clamping Kit (set of 4) QTY:


	Mitre Clamp Set Here's a trick solution to clamping a mitre, two mating blocks requiring only one, single clamp to provide equal pressure on four surfaces simultaneously. QTY:


	Mitre Clamp Set (set of 2) QTY:


	Mitre Clamp Set (set of 4) QTY:


	Adjustable Shelf Pin Drilling Jig w/- 1/4" bit Professional Shelf Pin Drilling Jig Accurate and Now Adjustable Alignment System This precision-machined, clear acrylic template allows you to drill both 1/4" shelf pin holes on perfect 32mm centres every time. Jigs are adjustable so you can place your shelf pins anywhere from 12.7mm (1/2") to 67mm (2-1/2") in from the cabinet’s edge. Simply align the movable strip using the indexing marks, double check with a square and you’re ready to go. Use on laminated, veneered or solid materials without the fear of any tear-out. Shelf pin jig for hand held drills, is 3.2mm (1/8") thick and is 500mm (20") long and is used with either 1/4" or 5mm self-centring bits. The 1/4" or 5mm up-cut spiral bits are sold separately. Both jigs feature pre-drilled indexing holes that allow you to extend the range of the jig. Simply insert the bit through the index hole on the jig into the last hole you have completed, clamp jig in place, and continue drilling more holes. Out of Stock

HD Pivot Hold Down Clamp (Incra)

Safety when woodworking is of paramount importance, knowing that your workpiece is securely held when you're working with a router or cutting that critical angle at your table saw is not only reassuring but commonsense. Too many expensive components are ruined, because of a small slip or movement when cutting.

The Incra Pivot Hold Down Clamp was specifically designed to accompany their Mitre Express Mitring Platform, and is now available separately to satisfy other hold-down and clamping needs in the workshop.

Put simply, it's a must have accessory for the serious, safety conscious woodworker and is sure to become a valuable 'helper' when cutting, drilling, sanding, shaping and assembling in your workshop.

Of course it comes with Incra's legendary innovation and quality built in.

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant