This great router accessory is the first four post router lift, and the first lift with an interchangeable router mounting plate. With pre-machined hole patterns and fixings for many different routers, now virtually every router type can be adjusted from above the table.
UniLIFT's are 'Digital Ready' pre machined to accept the Wixey Digital Read-out.
Ideal for UniLIFT - The Wixey Remote Digital Readout is a kit that can be adapted to a number of woodworking machines, including router lifts, router tables, and shapers. It has a remote display connected with a 900mm lead that can be disconnected for easy installation and access, this lead can be changed to a longer lead if required (Cat 5 Computer Lead)
The easy to install kit requires drilling 2 small holes in your router lift and table using the drill bit supplied. Mounting hardware is included.
The large easy to read display reads in inches with fractions or millimeters. The fractions are displayed using “Precise Fraction Technology” which gives you 4 times the accuracy of other fraction readouts.
The decimal inches are displayed in .001” increments and the millimeters in .05mm increments.
If you're doing free hand routing, you know how tricky it can be to start the cut. Router bits tend to spin the board and gouge the wrong edge when you start the cut. This often results in damage to your carefully shaped furniture parts. Starting Pins can help you gain control but don't offer dust collection or protection from flying chips. The new Woodpecker Free-Hand Guard does all these things in a well built, high quality form.
The Free-Hand Guard serves three purposes; first it provides a fulcrum to rest your board against, second a dust port for a hose hook up and third a shield to keep chips from flying up into your face. (The shield is not a substitute for safety goggles.)
Our new Free-Hand Guard attaches directly to any Woodpecker Router Plate or Lift. Two knobs make it simple and fast to install or remove. It's also adaptable to other brand plates by simply drilling two holes and using the included alternate attachment screws. (Instructions included.)
The Free-Hand Guard is made up of a laminated birch base, a Phenolic top plate, an acrylic shield with a combination 2-1/2” – 2-1/4” dust port.
Accommodates materials up to 1-1/2” (38mm) in thickness.
For those needing a greater variety of TwistLOCK Rings for your Woodpecker Router Plate or Router Lift, here they are. This set includes seven different TwistLOCK style rings with varying holes sizes and one blank ring with no hole. They’re compatible with any current model Woodpecker Router Plate or Router Lift including:
Set includes one each, solid, 3/4, 7/8, 1-3/8, 1-5/8, 1-7/8, 2-1/8 and 2-3/8.
These new rings are moulded from a polycarbonate reinforced ABS. This tough plastic won't chip your router bits or ding and dent from unexpected drops to the floor. They are molded to tight tolerances assuring a smooth transition to the surrounding plate material. (Only available as a set.)
Made in USA
Set Includes:
Zero
5/8”
7/8”
1-3/8”
1-5/8”
1-7/8”
2”
2-1/8"
Copyright 2006 All Rights Reserved. Theme by
Practical-Webs
Made in the USA
