Home | About Us | Testimonials | Search | Project of the Month | Braggers | FAQ's | Links

Current Category T Track Products > Knobs, Clamps etc

	Knob 1/4-20 x 1 T-Knob Our best selling knob, suits a wide range of applications, use in conjunction with rectangular nuts and nylon washers. Click on image above for further information.	QTY:

	Knob 1/4-20 Thru T-Knob T Knob thru style 28mm Here's the latest addition to our knob range.  Added to our range in response to requests for a slightly smaller knob, that still retains an easy grip for significant clamping force.  This thru style knob accepts readily available 1/4" - 20 bolts which also are compatible with our wide range of T Tracks and Scale Tracks.   Overall Width (across wing) 1 1/8" 28.6mm Overall Height 3/4" 19.0mm Hub Diameter 9/16" 14.3mm Hub Height 3/16" 4.8mm	Out of Stock

	Knob 1/4-20 Thru 3 arm   KNOB 1/4-20 Thru 45mm Diameter, 3 Arm finger grip, medium sized, steel threaded insert. Use with ¼” -20 Hex head bolt in T Track, to secure stops, brackets and other fixtures.   Overall Diameter 44.5mm Overall Height 22.0mm Hub Dia. 22.0mm Hub Height 8.0mm	QTY:

	Knob 1/4-20 Thru 5 lobe Knob thru 1/4-20, 5 Lobe style. large 57mm diameter  A stylish knob large enough to comfortably exert significant tightening force. Click on image above for further information.	QTY:

	Knob 1/4-20 Knurled Brass Knurled brass knob. An economical solution for jigs etc. that are space conscious, designed for finger clamping pressures.  PACKS of 10 ONLY. Click on image above for further information.	QTY:

	Rectangular Nuts 1/4-20 Slides in track and allows use of ¼” threads, such as Stud T Knob or threaded rod and thru Knobs   Sold as PACKS of 10 ONLY.	QTY:

	Nylon Washers 12.7mm Nylon Washer, 12.7mm x ¼” x 5.5mm  Use in conjunction with all knobs to provide additional tightening and security. Sold as PACKS of 10 ONLY	QTY:

	Cam Clamp Kit Add a quick release lever to your shop jigs and fixtures Adding cam lever clamps to your jigs, fixtures and fences provides a quick release system that is faster and easier to use. Kit includes one cam lever, 1/4"-20 brass insert, and a nylon spacer. 1/4"-20 hex head bolt not included. Cam lever will clear approximately 3/4" of the end of a bolt.	QTY:

	HD Pivot Hold Down Clamp (Incra) Safety when woodworking is of paramount importance, knowing that your workpiece is securely held when you're working with a router or cutting that critical angle at your table saw is not only reassuring but commonsense.  Too many expensive components are ruined, because of a small slip or movement when cutting. The Incra Pivot Hold Down Clamp was specifically designed to accompany their Mitre Express Mitring Platform, and is now available separately to satisfy other hold-down and clamping needs in the workshop. Put simply, it's a must have accessory for the serious, safety conscious woodworker and is sure to become a valuable 'helper' when cutting, drilling, sanding, shaping and assembling in your workshop. Of course it comes with Incra's legendary innovation and quality built in.	QTY: