Product Code: TRA001+TLRP+XX
was $880.00 now $835.00 inc GST
Products by Brand » Pro Products »

Triton Router TRA001, Aluminium TLR Plate and Xtreme Xtension CVP

The ideal package for the hobby woodwork or light industrial application.


Triton TRA001 2400watt Plunge Router


• 1/2" and 1/4" collets
• 2400W / 3-1/4hp motor provides enough power for even the toughest timbers
• Automatic spindle lock engages only power switch cover is closed
• Soft start and variable speed provides the perfect speed for all cutter types
• Single button switches from plunge to fixed based router with rack and pinion adjustment
• Micro winder enables continuous fine depth adjustment through the full plunge range
• Above the table, single wrench bit change for quick and easy bit changes
• Electronic speed control ensures a fine finish on all materials
• Removable plunge spring for easy bit adjustment when table mounted
• 3-stage turret with direct reading scales for precise pre-set cut depths
• Fully enclosed guarding provides maximum protection from the cut zone and assists dust extraction
• Multi-function fence provides optimum control for hand-held use and circle cutting
• Quick-fit pins for fast fitment and removal from the fence and RTA300 Router Table
• Side air vents reduce intake of dust into the motor casing when mounted upside-down in a router table
• Excellent dust extraction for a cleaner, safer working environment
• Easy access brushes allows the end user to change worn brushes
• Single wrench bit change through the base is achieved with the automatic spindle lock
• Safety Switch Shutter locks closed in bit-change mode to prevent router being switched on


• 1/2" and 1/4" collets
• Depth Adjustment : Micro winder
• Electronic Speed Maintenance : Yes
• No Load Speed : 20,000rpm
• Plunge Range : 0 - 68mm
• Power : 2400W
• Power On Indicator : Neon
• Product Height : 310mm
• Product Length : 180mm
• Product Weight : 6.3kg
• Product Width : 300mm
• Safety Power Switch : Yes
• Sound Pressure LP : 89.8 dB
• Sound Power LW : 100.8 dB
• Speed Maintenance Under Load : 8,000 - 20,000rpm


• Table height winder
• 1/2" collet
• 1/4" collet
• Multi-function fence
• Collet wrench


Woodpeckers Cast Aluminium Router Plate

If you're looking for the highest quality router plate money can buy, you found it. This is stronger, stiffer and less prone to warp or flex then other aluminium, polycarbonate or acrylic router plates. In addition, its durable, low friction anodized coating makes it easier and smoother for wood to glide across. Although this fixture grade material is more expensive, it's numerous advantages make it well worth the few extra dollars for what typically is a one time purchase.  Along with superior materials, each Woodpecker Router Plate features eight top accessible fine pitch levelling screws and two adjustable spring loaded plungers to make it easy to achieve a flush, perfect fit in your router table opening  



With each Cast Aluminium Router Plate, you also receive (3) precision moulded TwistLOCK Rings, a metal starting pin, spanner wrench and router mounting screws. The ring opening sizes are 1", 1-3/16" and 2-5/8". The router plate itself has a 3-9/16" (90.5mm) opening to fit any commonly available router bit. Dimensions: 9-1/4 x 11-3/4 x 3/8 thick. (235mm x 299 x 10mm)  All our Router Plates share the same 'footprint', that is a router table set up for a Aluminium Plate can be simply upgraded to any other plate or lift in our range.


Xtreme Xtension by Router Technologies

This extension collet is a terrific accessory for your plunge router. This is the only bit Xtension that is balanced, and short enough to not add run out to the bit, yet still extend itself above the table for quick, easy, single handed router bit changes,


This product can be especially helpful when using routers like the DeWalt 625 which in certain installations has insufficient travel to bring short bits sufficiently above the table. The Xtreme Xtension provides for 25mm of grip range and extends the cutter 32mm and is slightly less than 45mm in diameter.  Supplied complete with a ¼” reducing collet bushing and a T Handled ball wrench.  This ball wrench allows you to access the locking screw at an angle for speedier bit changes.


Common Sense must be used, as this product is recommended for variable speed routers only!!!  Using it with Fixed Speed Routers should be strictly limited to bits of 20mm or less cutting diameter.  The table below shows the suggested speeds for various bit sizes but does not allow for variables, such as, Router Bit quality and / or condition of the router.










Most Popular