Lack of collet height also limits most 1/4" and some 1/2" shank cutters from being inserted far enough into the collet to work safely and prevent possible shank failure. The only way to extend the reach of these collets is to use an extension.

Dynamically balanced and machined from Fatigue Proof Steel, the Xtreme Xtension fits into any 1/2" collet, and extends the cutters reach 32mm (1 1/4").  The single tool cutter changing eliminates searching for and holding the spindle lock while securing the collet with a wrench.

The extensions 25mm (1") deep bore provides support for even the shortest shank cutters. Use the included 1/4"x1/2" reduction sleeve to safely support your 1/4" shank cutters.  Optional 8mm x 1/2" reductin sleeve also available.

Use this extension with any router table or with any router lift. It is ideal for 1/2" through 1"  thick insert plates and router table tops. A 1 3/4" hole is required in the insert or table to allow the body of the extension to pass through for above table cutters changes. 

Installed in the router cutters are quickly changed, using the included 5/32" allen wrench and locking bolt, to tighten or loosen the lock wedge. 1/4 to 1/2 turn of the allen wrench is all that is required to operate the extension. Both the locking bolt and locking wedge are hardened to help provide trouble free service.

The extension is for use in table and stationary machine mounted applications only. It is not to be used hand-held or with non-variable speed routers. It also is not to be used with fixed based routers because when extended they do not have a long enough housing to lower or raise the router in the housing and safely retain enough clamping pressure of the housing on the motor body to securely capture the motor.

Click HERE to download important Router Speed Chart