This fixed base router is fully compatible with American style router lift systems such as the INCRA Mast-R-Lift II and therefore allows for precise and easy adjustment of cutter height without any cutter length loss below the table. The motor shaft and auto-release collet raises above the table for easy cutter change with the supplied spanners. The soft start variable speed control is sealed for reliability in the hard working environment of router table or CNC machines, and is engineered to maintain constant speed under load.

This router is designed specifically for use with router lifts and CNC machines that require a 106mm (4.2") - diameter router. AUKTools fixed base router is not to be used freehand.

A No Volt Release switch that always resets to the 'off' position whenever the power supply is interrupted, for example when the lead is unplugged, or in a blackout, the deluxe version features bright, illuminated switch buttons, to make finding the right button easy in any light or application.  The speed controller is conveniently located so as to provide easy speed control without the need to reach under the router table.  The Router and Control Station are connected via a shielded cable.  Control Station is made in Australia to Australian standards.
 

• Motor outside diameter: 4.2inch (106.7mm ) to suit Incra Mast-R-Lift, Jessem anf many other router lifts .
• Motor power: 230V, 50Hz, 1800W (2.4 hp)
• Motor speed: 10,000-22,000 RPM.
• High Performance SKF bearings
• Standard accessory:1/2inch ,1/4inch er collet, 
• 2 x Cranked collet wrenches.
• Soft start function
• Current over-load protection.

Video courtesy of our UK partners, Australian Version supplied with SAA plug.
 

Note: Router and Control Station are available as a package, the Router Control Station is not available separately, nor is it able to be retrofitted to other routers.